Isolate Your Ice Bath Without Draining It
The KOVE Ice Bath Isolation Stop Valve Set makes chiller maintenance, filter changes and winter storage much easier.
Installed between your ice bath and chiller connections, the valves allow you to shut off the water flow before disconnecting hoses or equipment.
This means you can isolate the bath from the chiller without emptying hundreds of litres of water every time you need to carry out maintenance.
Why Use Isolation Valves?
Without stop valves, disconnecting a chiller hose can allow water to drain freely from the ice bath.
By fitting one valve to the inlet and one to the outlet, you can close both sides of the water circuit before removing the hoses.
They are particularly useful for:
- Cleaning or replacing filters
- Disconnecting the chiller
- Moving or servicing equipment
- Winter draining and storage
- Reducing water loss during maintenance
- Keeping your setup neat and easy to manage
Simple Operation
Turn the handle to close the valve before disconnecting your hoses.
Once maintenance is complete and everything has been securely reconnected, reopen both valves to restore water circulation.
Always confirm both valves are fully open before switching the chiller on.
Designed for Chiller-Compatible Ice Baths
The valves feature male-to-male threaded connections and are designed for installation within compatible ice bath and chiller plumbing systems.
Please check the thread size and connection type on your existing setup before ordering.
What’s Included?
- 2 x KOVE isolation stop valves
- Male-to-male threaded connections
- Integrated shut-off handles
Technical Specification
| Product Type |
Ice Bath and Chiller Isolation Valve |
| Connection Type |
Male-to-Male Threaded Connector |
| Approximate Length |
5 Inches |
| Quantity |
2 Valves |
| Function |
Stops water flow between the bath and chiller |
| Installation Position |
Ice Bath Inlet and Outlet Connections |
Important Installation Information
- Ensure all seals and O-rings are correctly fitted.
- Use suitable thread-sealing tape where required.
- Check all connections carefully for leaks before use.
- Always open both valves fully before operating the chiller.
- Never run the chiller with either isolation valve closed, as this will restrict water flow and may cause a flow error or damage the pump.
Make Chiller Maintenance Easier
No draining. Less mess. Faster maintenance.
The KOVE Isolation Stop Valve Set is a simple upgrade that makes everyday ownership of a chiller-compatible ice bath significantly more convenient.
